Holds Without Constant Pressure
The progressive ratchet keeps the jaws closed after each squeeze, reducing the need to maintain hand pressure.
1
/
9
9-in-1 Ratcheting Self-Locking Pliers | Locks On, Frees Your Hand
571.00 SEK
-
Free worldwide shipping
-
Free returns
-
Carbon neutral
-
Secure payments
Lock the Part. Free Your Hand.
These 9-in-1 ratcheting self-locking pliers keep a real workpiece held between the serrated jaws after you stop squeezing—so the hand that would normally babysit ordinary pliers can get back to measuring, aligning or repairing.
Progressive RatchetQuick-Release LeverLTL1010 · 1 Tool
Squeeze to Advance. Let the Ratchet Hold.
The short demonstration shows the real action: a metal part is fully between both jaw faces while repeated squeezes advance the locking mechanism.
1
Put the actual workpiece fully between both serrated jaw faces.
2
Squeeze the straight handles repeatedly until the ratchet holds securely. Confirm both jaws are in contact before letting go.
3
Continue the job with the freed hand, then support the load and use the release lever when you are ready to remove the tool.
Built for the Moment One Hand Is Not Enough
The benefit is not an empty locking action. The jaws must be gripping the part you need held.
Real Jaw Contact
Serrated jaw faces meet the workpiece from both sides for a visible, practical hold.
One Tool, More Workshop Jobs
Grip, hold and wire-work functions bring several common bench tasks into one plier design.
Long, Straight Handles
The approximately 5.5 in handles provide a full two-handed setup grip without a bent or distorted tool shape.
From Constant Squeezing to a Locked Hold
Same kind of bench task, different demand on your hand.
Before
One hand must keep ordinary pliers squeezed, leaving the rest of the job awkward.
After
The ratchet keeps the jaws closed on the part, so that hand can return to measuring or fastening.
Less juggling at the workbench—because the tool stays clamped to the part it is actually gripping.
Four Jobs Where the Locked Grip Matters
Different places, different tasks, one rule: the workpiece sits visibly between both jaw faces.
Metal Alignment
Keep two steel layers together while your other hand squares and marks the next hole.
Engine-Bay Hold
Grip a metal clamp ear at a hose connection so your other hand can work a pick or fastener.
Stop a Nut From Turning
Hold a hex nut between the jaw faces while a wrench works the fastener from the opposite side.
Drill Aligned Metal
Keep two flat strips aligned while the freed hand starts a pilot hole.
One LTL1010 Tool
A straightforward single-tool package with supplier measurements converted for U.S. shoppers.
ModelLTL1010
Overall lengthApprox. 9.4 in
Handle lengthApprox. 5.5 in
Jaw openingApprox. 1.3 in
Cutting capacitySupplier-listed approx. 0.4 in; actual capacity varies by material and hardness
What Comes in the Package
1 × LTL1010 ratcheting self-locking pliers.
Fasteners, metal parts, wrenches, measuring tools, drills and holiday props shown in demonstration scenes are not included.
For a secure hold, place the workpiece fully between both serrated jaw faces and verify contact before releasing hand pressure. Wear task-appropriate eye and hand protection.
Questions Before You Put It to Work
How does the ratchet keep holding?
The toothed ratchet advances as you squeeze and resists the handles reopening. The workpiece still needs to sit fully between both serrated jaw faces, with visible contact on both sides.
How do I release the jaws?
Support the held part, then operate the dedicated quick-release lever to disengage the ratchet. Do not twist or force the tool off a loaded workpiece.
What is included?
One LTL1010 ratcheting self-locking pliers. Scene props and other tools are not included.
How large is it?
Overall length is approximately 9.4 in, handle length is approximately 5.5 in and the jaw opening is approximately 1.3 in.
Can it cut every 0.4 in material?
No. The supplier-listed approximate capacity depends on the material, hardness and wire type. Choose a suitable cutter for the material and use proper protective equipment.
Give a Hands-On DIYer One Less Thing to Hold
A practical Christmas workshop gift for gripping a real part, locking it in place and getting the other hand back into the job.
Choose LTL1010 · 1 Tool above
